Frequently asked questions
- Detach a strip
- Top-load washer: place strip inside washer
- Front-load washer: break strip into four or more pieces and place in detergent dispenser
- Add clothes
- Start washer
For best results, we recommend that you place the Dizolve strip in the detergent dispensing compartment of front-load machines. If the compartment is small or shallow, tear the strip into smaller pieces so they fit neatly in the dispensing compartment.
If your washer has separate detergent compartments for pre-wash and main wash cycles, we recommend that you place part of the Dizolve strip in each compartment. Simply follow the instructions from your washing machine manufacturer and use Dizolve as you would any liquid or powder detergent.
For all washers, Dizolve can also be placed directly in the washer, on the bottom of the drum before adding clothes. Some newer HE machines use very little water and it is possible, in rare instances, that the Dizolve strip can get wrapped up in clothes before it gets wet enough to dissolve completely. Consumers report the same occasional issue with uni-dose liquid pack detergents.
Dizolve has the advantage that it can be placed in the dispensing compartment where the flow of water at the start of the filling cycle dissolves the strip.
No. Dizolve leaves much less residue on clothes than regular detergent, leaving them naturally soft without using fabric softener.
It also means Dizolve will leave towels more absorbent and synthetic sports wear fabrics will maintain their moisture-wicking properties better.
Less residue also helps make Dizolve a great choice for people with very sensitive skin.
In modern laundry detergents, the amount of suds produced does not relate to cleaning power.
High Efficiency (HE) washing machine manufacturers recommend the use of low-sudsing detergent formulations that are specifically designated as HE-compatible.
Dizolve uses a special, patent-pending low-sudsing formulation that is HE-compatible and effective for all other types of washing machines.
Other detergents that produce lots of suds typically include suds-producing agents that do not enhance cleaning power – they are added mainly for appearance purposes. sensitive skin.
In most situations, one strip of Dizolve is recommended for one load of laundry.
A standard single load is considered to be 3 to 5 kg of dry laundry that is lightly soiled and washed in moderately hard water. As with any detergent, you may want to increase the amount of detergent used if your water is very hard, the load extra soiled, or your load size is extra large.
Simply add a second or third strip depending on your situation. Unlike other uni-dose detergent packs, you have the flexibility to tear a strip of Dizolve in half for very small loads or hand-washing.
We do not recommend washing silk fabrics with Dizolve. We recommend that consumers follow the specific washing and detergent recommendations of each clothing manufacturer. Most silk fabric manufacturers usually recommend dry-cleaning or hand-washing silk with specific cleaners.
Dizolve laundry detergent is a vegan product: no animal-dervied ingredients are used in it, and no testing on animals has been conducted by us or our ingredient suppliers.
We voluntarily publish our ingredients list and MSDS
as part of our commitments to transparency and sustainability.
The Dizolve MSDS may be confusing because it includes references to historical animal test data taken from literature sources.
The MSDS format is regulated by law and it requires us to include data that is published in the literature that catalogues the characteristics of chemical compound that are used in our ingredients. The animal test data it refers to are drawn from the historical, published literature.
Unfortunately, at some point in years past, some laboratory (unknown to us) did conduct animal testing on that compound and published their findings.
We do not support or condone that testing, but we are legally obligated to reference the data in our MSDS.